Home

About Us

Terms

Links

Contact

   

  6mm Resin Cast Scenics

 
 
   
 


 
 
 
 
 
 
   
Everything ...
     
    Accessories
    Airports
    American Civil War
    Bridges
    Castle Components
    Commercial
    Churches
    Damaged / Ruins
    Fachwerkhauser
    Farming
    Fantasy
    General
    Huts & Cabins
    Housing
    Industry
    Medieval
    Middle East
    Mediterranean
    Military
    Normandy / France
    Napoleonic
    Port & Marine
    Railway
    Roman
    Stalingrad
Vauben
    Viking
    The Old West
    World War I
     
    Perfect Six Range
   
   
 

Ordering & Payment
  You can now order through the shopping cart, or if you prefer you can still place your order by email.

SHIPPING is based on orders shipped within the UK

Customers outside the UK can order and pay online as normal, and the extra shipping cost will be invoiced separately.
 
   
  

 

   
   
   
 
 
6mm Railways
 
 
 
RAIL01 - Straight track
length 60mm : depth 10mm : height 1.5mm
  10 x straight single resin railway tracks on a thin base. Track suits 6mm metal rolling stock available elsewhere. Pack will make total length of track approx 600mm

3.00 set
 

 
RAIL02 - Curved track
length 65mm : depth 10mm : height 1.5mm
  10 x curved single resin railway tracks on a thin base. Track suits 6mm metal rolling stock available elsewhere. Total length of track approx 600mm

3.00 set
 

 
RAIL03a - Left & Right Points Pack
length 65mm : depth 24mm : height 1.5mm
  Single resin railway track points on a thin base. Track suits 6mm metal rolling stock available elsewhere. Set consists of two left and two right points.
 
2.00 set
 

 
RAIL03b - Junction Pack
length 65mm : height 1.5mm
  Single resin railway track junctions, crossover and buffers on a thin base. Track suits 6mm metal rolling stock available elsewhere. Set consists of two each Y junction type 1, Y junction type 2, crossover and buffers.

3.00 set
 
 
It is recommended that the track sets (RAIL01, RAIL02, RAIL03a, RAIL03b) are mounted on a card backing if not being permanently fixed to a board, as they are rather brittle and therefore susceptible to breakage, also being lightweight they tend to move around if not fixed down.
 
Tracks seem to suit 'H&R' and 'Irregular Miniatures' engines and rolling stock.
 

 
RAIL04 - Line-side Signal box
length 35mm : depth 22mm : height 27mm
  Brick and timber effect line-side signal box with slate roof. Lower half is brickwork and upper half is timber cladding and glass. Brick effect stairs leading to door on gable end and relay boxes at rear.

2.25 each
 
 

 
RAIL05 - Line-side Water Tower
length 30mm : depth 18mm : height 26mm
  Small brick line-side water tower with metal sheet effect tank above. Access door on one gable.

2.25 each
 
 

 
RAIL06 - Platform Booking Office
length 85mm : depth 24mm : height 26mm

  Brick effect structure with slate/tile roofing, canopy between outer units and two brick effect chimneys.

3.50 each
 
 

 
RAIL07 - Station Platform Section
length 60mm : depth 50mm (incl track) : height 6mm
6mm Railway Platform Section
  A platform section of paving slab effect with single length of track, platform sections can be butted together end to end or placed opposite each other for larger stations with two tracks etc, comes with separate steps & ramp that can be placed as desired.  (two sections would be required to mount RAIL06 Booking Office)

2.75 each
 

 
RAIL08 - Rail-yard Workshops
length 52mm : depth 20mm : height 22mm

6mm Railyard Workshops

  Brick effect walls with slate/tile effect roofing and skylights. Three large doors on front elevation and single doors on each gable.

Would also be at home in a farm or industrial setting

2.75 each
 

 
RAIL09 - Rail-yard Store
length 26mm : depth 21mm : height 23mm


  A small stores/workshop with brick walls and slate/tile roofing and roof vents, double doors ro front.

2.25 each
 
 

 
RAIL10 - European Style Station building
length 46mm : depth 30mm : height 30mm
  A stone effect model with plain chimney and tile roofing. The canopy is supplied loose and can be fitted to either side of the building offering a different effect or left off altogether if not required. The side extension has brick effect cladding, and the arched windows include basic mullion detail.

3.00 each
 

 
RAIL11 - Engine Shed
length 52mm : depth 22mm : height 31mm
  Brick effect walls with slate roofing. One gable has large double doors for engine access (as can be seen on the 'carriage works' image). The other gable has entrance door and steps as shown.

3.00 each
 

 
RAIL12 - Carriage Works
length 52mm : depth 44mm : height 31mm

6mm Carriage Works

  Brick effect walls with slate roofing. Gable ends have large double doors for carriage access as shown, other gable has entrance door and steps (similar to engine shed image above)

3.25 each
 

 
RAIL13 - Modern Platform Shelters
length 19mm : depth 22mm : height 12mm
  Set of four back-to-back open metalwork effect  modern platform shelters with sheet panel roofing.

2.75 set
 

 
RAIL14 - Platform Kiosks
 
  A three piece set of platform kiosks, one large double shop unit and two smaller single units.

2.75 set
 

 
RAIL15 - Line-side Lamp Huts
length 11mm : depth 9mm : height 11mm
  Set of six line-side lamp huts. Corrugated walls and roofing with roof vent. Small window on one end, plain door on other.

2.25 set
 

 
RAIL16 - Tunnel Entrances
length 34mm : depth 4mm : height 22mm
 
  Two small tunnel entrances of large stonework effect - arch will comfortably take one rail track.

2.25 pair
 

 
RAIL17 - Coaling Station & Water Tower
length 42mm : depth 37mm : height 32mm

6mm Coaling Station & Water Tower

  Brick structure with timber clad water tank and corrugated roofing to coaling plant which has  double doors in open position with a canopy over. Canopy will be supplied loose.

3.25 each
 

 
RAIL18 - Lineside Huts
length 20mm : depth 16mm : height 15mm

  Four general purpose small timber lineside huts with corrugated effect roofing.

2.75 set
 

 
RAIL19 - Coal Yard Set
length 23mm : depth 21mm : height 22mm (Yard Office)

  Small three piece coal yard set comprising 3-bay coal staithes, raised lineside coaling platform and small yard office.

2.75 set
 

 
RAIL20 - Footbridge
length 50mm : depth 38mm : height 33mm

  A brick & timber effect footbridge, spanning three tracks. Supplied in three pieces for self assembly.

2.75 each
 

 
 
 
 

 

Back to top

 

Copyright 2012-18 Leven Miniatures